White Bass at Penny’s Bend

Here in the Triangle area of the NC piedmont, we have two main runs of white bass from our local reservoirs, Jordan Lake and Falls Lake. One goes up the Haw River from Jordan Lake, and the other up the Eno River from Falls Lake. I’ve historically fished the Haw River run, but I’d not done so in several years. The Haw is a bit closer from my house, about 18 miles as opposed to the 27 miles to the Penny’s Bend area of the Eno. The weather was looking great this week, with temps in the 70’s and blue skies, with redbuds and dogwoods blooming…but the problem was that Monday of this week gave us heavy rain and flooding, with both rivers rising several feet. I decided to go to the Eno, as the Haw is a much bigger river win a bigger drainage and I figured that the Eno would be much more fishable on Thursday.

I wasn’t sure if I’d want my canoe, but I figured it could ride on my truck if I decided not to use it. So, canoe on top and with a load of flyrods in the cab, I took off for Penny’s Bend. When I got there about 11:30 (a dog walk, a workout, breakfast and 3 lattes can slow you down in the morning), I was not encouraged. The water was very stained from the week’s rain. There were a fair number of fishermen on the banks, sitting on 5-gallon buckets they hoped to fill with bass, but the rods were still. I grabbed my favorite 5-wt, as well as my backup ultralight spinning rod, as I was not sure if I could find a spot for a back cast. The banks were muddy and slick from the several feet of chocolate-colored water that had been coursing thru 3 days earlier. At the Old Oxford Road bridge, the Eno is about a short double-haul cast wide. I watched from the edge of the bridge a while, and decided the water was shallow enough to wade to a little island next to the main current just at the top of the main pool…if I could get down the muddy bank with inserting a flyrod up my…well, you get the idea 🙂 . Whew! Made it, and then into the cool, fast water. It was probably about 60F, but I didn’t take the temperature. I was wading wet, and the water, calf deep, felt good.

What fly to use? I decided to follow the old adage of a black fly in stained water. Tied on a black sparkle bugger, made a cast and wham! a small white bass on the first cast, aimed at the seam between the fast riffle and the eddy in the big, deep pool.

white bass 1(sm)

The next three casts brought 3 more fish! My streak broke on the fifth cast, however, as my bugger snagged a stick floating in the current. For the next hour or so, I was almost continually hooking and landing white bass. Almost all took my fly in a circle at the edge of the current no more than 20 feet across; with these bass, it’s all about finding a seam where the schools are traveling. These were not big fish by and large, but lots of fun to catch. So many, in fact, that they finally chewed up the bugger and I had to put on another one. A happy thing! By 1pm, the bite was slowing – I was still catching one every 5 minutes or so, but they were a bit bigger. My best fish of the day took the fly in the fast water, and stayed in the current, putting quite a bend in the 5-wt.

white bass 2(sm)

Another flyfisher arrived and took up a position on the other side of the riffle. He immediately caught one, but then no more. I was ready to go by then, as I’d really had my ticket punched. He slid into my spot as I climbed the bank (I found a better way up than down), and I wished him well and headed home for a cold beer!

A heckuva a nice spring day!

Shad fishing 2014…

The calendar said spring, but the weather was anything but springlike this morning when I headed to pick up Sam for our annual trip to Weldon. The temperature had dropped into the mid 20’s overnight, and was still below freezing when got to Sam’s house. It’s a good thing shad fishing is “civilized” with the bite being largely unaffected by time of day. We figured that by the time I navigated the traffic jam to his house, factoring the 1:45 hr drive to Weldon, we’d be on the Roanoke River by 10:30. And we were, but the temperature was still at freezing when we put the canoe in the river to paddle over to our favorite rock. We portaged the “big rapid” and set up shop at the top of “Little River,” a fork that creates a large island.

There was one boat anchored about 50 yards downstream of our rock, and they were catching fish. That’s a good spot they were in, but in a canoe it’s difficult to anchor and fish in such fast water. The flow was at 7400 cfs, higher than I’d like, but fishable (at that level, a river-knowledgeable captain can take a power boat up the rapids, but I would not want to do it at less than 10,000cfs) . The trick with shad is to find the right seam in the current and the right depth, along with the right color fly and right speed of retrieve…small differences can have a big impact on success. Our position was good, but not ideal given all the variables today. The fish were there, but not in the numbers we’ve seen on some trips. The water was still quite cold due to the late spring.

We started with pink flies and orange flies, but no strikes. We were using intermediate sink tips on 7wt rods. As much as anything, this is because you spend the day making long double-hauls, and it’s just easier with a rod with some body strength. Finally, since we weren’t catching anything, we hollered to the guys in the boat…”what color?” They said green and yellow. Tried that and started catching some fish. The sun went behind some clouds, the wind kicked up and I was seriously thinking about putting on my neoprene gloves, in late March! Geez, this is the South! After lunch, we tried some other colors, and pink produced as well as chartreuse. Go figure! All told, each of us caught 15-20 Hickory Shad. These are strong, acrobatic fish that will bend your rod.

20140327-215224.jpg

It was a good day. It’s great to catch up with Sam, and we each caught enough fish to be content. I’ve had days when I’ve caught more, but also days when I got skunked. Fishing, catching and fellowship. I need to do more of this…

Winter trout

Today was my second day this season to fish the lake at Camp Clearwater, a YMCA camp near Chapel Hill. It’s just 8 miles from my house, and the local TU chapter supports a winter trout fishery there. It has been winter for sure, even here in the south, and the north bank of the lake was still covered in snow and ice, though the temperature was in the upper 40’s under sunny blue sky. Naturally sustaining trout populations are usually at least a two hour drive for me, so this is a luxury. While these are annually stocked fish, the lake is several acres in size and the fish are often quite challenging to catch. In December, I fished hard all day and caught just a couple. However, today was different. Unusually, I outfished my buddy Sam, though I need to give him an “assist” as in basketball, since he tied the flies I used for about half the 15-20 fish I caught, including this very nice one:

joel with nice trout (medium)

Most of the fish I caught today were smaller like this one. However, they were often spunky and acrobatic, with many jumps:

smaller trout (medium)

I caught about half of the fish on a Chili Pepper streamer that Sam tied (including the big one), and most of the others on an olive fly with an orange front highlight that another fellow angler shared (he called it a “Diawa” but I can’t find a pattern; will have to reverse engineer!). Orange seemed to be the ticket today. Lest you think I’m a complete fly mooch, I did catch one on flashback pheasant tail I tied 😉 . When I wasn’t fishing the streamer, I had a dropper rig under a strike indicator with the flashback pheasant tail as the upper and the “Diawa” as the bottom.

It was a great day, with great fellowship. I’ll be sure to sign up for Clearwater days again next year.

Bring on spring!

Here in NC we often get spoiled by warm days in February, hinting of things to come. It’s been a cold winter here (I know, we are spoiled!) and I’m looking forward to spring. As I shoveled a few inches of snow and slush off the driveway today, the sun was warm and getting higher in the sky, the wind light, and the birds chirping. Soon, the shad will start their migration up the rivers from the sounds and Atlantic Ocean, and I was thinking about sunny March days, catching dozens of fish. I am looking forward to being able to (hopefully!) mesh my newly flexible schedule with the arrival of fish, warm days, and sunshine. In the mean time, I’ll enjoy a day of trout fishing this weekend at a local pond, stocked during cold weather…

Chartplotter/DSI installation

I’ve been running the Defined Benefit without a sonar (depth finder) since I bought it in September. I’d been waiting to get myself one for a Christmas present 😉 . It’s possible to spend big sums of cash on these things, depending on screen size and feature set (such as touch screen interface). I wanted something with GPS, stored waypoints and routes, the ability to use a NMEA 0183 interface to send position data to a VHF radio, a set of base charts, and, of course, good sonar function. I decided that screen size was a place for some savings, so I looked for the 4 and 5 inch screen units. I found a Lowrance Elite-4 DSI for $319, with a $100 rebate on top of that (Lowrance has just come out with new 4 and 5 inch models, and is flogging the stock of old ones).

I spent some time on a couple days this month getting it installed. Running the transducer wire to the console was a pain, as the pull cord in the conduit must have been wrapped around a wore or stuck on a cable tie. I ended up having to get a vinyl-coated flexible wire and pushing it thru the conduit. Then there was the question of whether to mount it on the console or in the T-top box (where a fused power connection was easily available; the console dashboard hookup on the DB is both quite full of wires and hard to access). I mounted it on the console, as a) the transducer cable, at 20 feet, wouldn’t reach the T, and b) my wife couldn’t see the display in the T! I realized that I needed to order an NMEA 0183 interface cable ($30), and pick up a spool of wire to connect to the power bus in the T, and to extend the NMEA interface cable, since it was only 6 feet long. Getting the wires to the T for the NMEA 0183 and power was more difficult than I’d hoped…I couldn’t get it pulled up from the bottom, so I had to switch and pull from top to bottom, and I to pull the wires one at a time, as the bundle wouldn’t make the turn in the frame otherwise.

With the wires in place, I could connect to the VHF and power. It powered up, and got a GPS fix and set the time/time zone. I powered up the radio, and there was the lat/lon on the display! I can tell the transducer is connected, as the temperature sensor was working, but until I put the DB into the water, I can’t test the sonar. Hope the transducer is positioned well.

I’m sure that saved myself at least a couple hundred bucks in installation fees, and likely more.

New Years Europe trip

We’re now a week back from our trip to London and Paris, and I’m finally back on US Eastern time, tho I am nursing a cold I’ll blame on traveling. It was a truly great trip, in spite of weather that could have been better. We (myself, Jan, and my sister Susan) flew direct between RDU and LHR, so that reduced some of the air travel stress. On arriving in London after the overnight flight, we were happy that one of our rooms was available for check-in at 8AM, as that gave us a chance to get organized for the day. Since it was raining, we opted to head to the British Museum, getting there about 10 (opening time) along with everyone else in London. However, we saw a lot (Susan had never been there before, and the last time Jan and I were there, it was a short visit) and it was a great start to the trip. We went back to the Chesterfield Mayfair to prop up our feet for a while. We had tickets to the G-Funk jazz show at Pizza Express in Soho, so we headed over there about 7:30PM to have a slice before the 8:30 show. We’d heard about this venue on internet radio, and it was outstanding. Imagine a basic pizza chain restaurant, where you go down into the basement to a room that seats about 75 people at tables, with about 10 feet between you and the performers. Miles Gilderdale (of Acoustic Alchemy) is the lead of G-Funk, and put on a fabulous show for 2 solid hours. If we lived in London, we’d be there all the time…

20140111-201705.jpg

On Tuesday, we slept in, knowing we’d stay up for the New Year’s fireworks, so we headed to Buckingham Palace a bit before 11 to see if the changing of the guards, or Horse Guards parade was going on. Alas, canceled due to blustery, rainy weather. We headed down the Victoria Embankment, went by St. Paul’s Cathedral, and then crossed the Millennium Bridge to the Tate Modern Gallery. We headed back for dinner at the Chesterfield Mayfair (quite nice) and then to the edge of St. James park to watch the fireworks. We’d read about this, and it lived up to expectations, despite the stiff breeze blowing the pyrotechnics.

New Year’s Day brought more rain but also the London New Year’s parade, featuring about 8500 participants and a half-million spectators. The parade stages on Picadilly and around Berkeley Square, just a couple blocks from our hotel, so we watched an hour or so before heating to West End for a matinee performance of Matilda. This is an excellent show, and we were fortunate to have seats on the 3rd row on the center aisle.

20140111-203446.jpg

We turned in early since we were catching the 0540 train to Paris. The weather actually sounded promising for the 2nd, with rain ending about the time we arrived in Paris, and sure enough, we got to Paris with clear skies and the sun coming up (at 9AM local time, with the hour difference from GMT). We took a cab from Paris Nord to Notre Dame, and then strolled toward the Louvre…to find a 4 hour line to buy tickets. We stood in line for about 30 minutes, and then a fortuitous chain of events transpired. Where is the “loo” at the Louvre queue? Google said try the Carosel du Louvre. I reconnoitered, and found not only a fine facility for 1.5€, but also a very short line to buy tickets at the Museum Pass shop. Some quick texting and we were in! Saw the high points (gee, the Mona Lisa is small from across a sea of people in the room) and absorbed the ambient culture 🙂 . Then, to the Tour d’Effiel. There was a ridiculous line for the elevator, so we stood on queue for about 45 minutes to walk up to level 2 (the top was closed). It was well worth the walk! We had dinner, admired the lights on the Tower, and strolled up to the Champs-Élysées. The Christmas lights were still up and were spectacular. However, we had a train to catch (the 2113 to London) so we headed to the station.

Friday the 3rd, we slept in, and then tried to ride the London Eye. However, it was shut down for technical problems while we were in line 🙁 (the Eye was due to shut for 2 weeks for annual maintenance on the 6th). Oh well. Grabbed some fish & chips at a pub near the hotel before the evening show of Les Misérables, which is my all-time favorite musical. We had the great fortune to have seats on row 4 for a great view.

20140111-210633.jpg

Saturday was our last full day, and we decided to visit the National Gallery on Trafalgar Square, and to try the Eye one more time. Successful on both counts! Some Google homework for the reader – why is there a big blue cock in front of the National Gallery in Trafalgar Square 😉 ? The Eye is spectacular, particularly after dark…

20140111-211300.jpg

What a great trip! Almost makes up for 9 hours cramped in an airplane seat, fighting the jet stream, headed back to North Carolina…

An exemplar of the “assembled web”

I spotted an article in Forbes by Dries Buytaert, the creator of Drupal, in today’s scrolling twitter feed. I’ve dabbled a bit in Drupal, creating a few sites, but aside from looking at the PHP to debug a few things and trying a few patches, never really got technically below the level of installing and configuring modules. Even some of the more technical things in Drupal GUI configuration, such as creating content types and views to retrieve and present that content, are still done with boxes, radio buttons, checkboxes and lists. If you think about it, you are dealing with something that’s close to the MVC paradigm without having to write code. Buytaert says an individual without coding experience can “…use an open source CMS to assemble a site by simply snapping modules together…” That’s the essence of the assembled web. We know, in a fairly intuitive manner, how to create a personalized experience on our smartphones and tablets by selecting and configuring apps from an app store. This is really the same philosophy, just rendered on a server to allow others to access your content. There’s an app (or module or plug-in, depending on the CMS and its terminology) for that, to allow anyone to create on the assembled web. It really takes the Web back to its roots as a person-to-person sharing service. Berners-Lee envisioned it as a tool for sharing information between researchers, where individuals were creators and consumers.

The catch in all this is that it’s quite promising and almost there, but it’s not quite as seamless for the users as we’d like. WordPress is a bit further along this path than Drupal, I think, especially with the ability of current versions to maintain and update the “apps” (plugins, in WordPress-speak, and even some core updates). Drupal 7 doesn’t auto update, and the upcoming Drupal 8 won’t either, at least initially, insofar as I can tell. Some think that this is a bad idea anyway, in that it could lead to a massive compromise of servers. In my humble opinion, I think that the risk is actually greater of not updating sites, having seen the result of many compromised WordPress instances. It’s a double-edged sword – the easier it is to use a tool and create content, the lower the bar for the technical competency to do that, and the greater need for software that updates itself, as less-experienced (and read less paranoid as well) site owners simply don’t appreciate the need to keep things current. Drupal has a steeper learning curve (it doesn’t do much out of the box, unlike WordPress), thus the folks that run Drupal sites tend by necessity to be more technically literate and are thus more attuned to the need to patch/update (this is not to disparage the many, many very competent WordPress admins doing great things with the software, it just that it’s so easy to use and get started, that it’s an attractive target vector for compromise of less-well-maintained sites; this site runs on WordPress which I religiously patch and update!).

Buytaert is right that the the assembled web is the wave of the future, and he’s also right that it’s not a threat to the livelihood of (some) developers. However, the days of hand-crafting HTML are over, and there is a slice of work that has been squeezed out. Developers and integrators that understand the add-on technology and economy will thrive, just as those that have created apps have helped smartphone and tablet ecosystems to thrive and driven the sales of those devices. The assembled web makes it easier for everyone to share and publish creatively. It’s not quite point & click, but is asymptotically approaching that goal. I think that the tail is still a bit long, however, and getting to Buytaert’s vision of “…a marketer could build a site for a new product launch without relying on the engineering team. An entrepreneur could launch a company site without hiring a webmaster…” will take a while longer yet. That marketer or entrepreneur can get started, but the devil is always in the detail, and it’s not quite “fire and forget” on setting up a site…but it’s getting closer.

Mailbox app (iOS)

I was cleaning up my Dropbox account today, and in the process stumbled upon a new app called “Mailbox.” It’s done by Dropbox, via an acquisition of a small app developer. I signed up initially to get 1GB of free storage added to my Dropbox quota, but I’m actually quite intrigued by the app. You may why another email app (and my friend and colleague Paul Jones says “why email” but that’s a different story) but I am really intrigued with the simple way this app works and helps to quickly dispose of a great deal of email. It’s not a regular email client. It doesn’t provide you access to all your Gmail folders/tags (and currently only part of the “all mail” archive). It only works with iOS and Gmail at this time. It’s focused on helping to manage specific interactions with mail with a goal of clearing out your inbox and focusing on what needs attention. Its gestures are intuitive and highly effective. It combines a function I’ve used before with different tools (email ticklers, using Nudgemail) but does it more intuitively and in a more flexible and integrated fashion. Yes, you “give up more privacy” by allowing their servers to pre-process your mail (they claim it’s unreadable there, caveat emptor). However, if I wanted my email to be private, I’d a) encrypt it and b) not put it in email anyway 😉 .

If you are an iOS and Gmail user (and want an extra gig in your Dropbox) check it out. It might work for you…

Poking my Raspberry Pi again

It’s been a while since I did much but periodically check my Raspberry Pi to see if it was still working. However, I recently updated all its software and decided to try a few more things. I’ve more or less decided that I’ll just stick with my forte, software, rather than try to solder stuff and leverage the GPIO pins. I appreciate the ability to interface to the physical world, but soldering is not in my wheelhouse 😉 . I’ve read recently about using the RPi to act as one’s internet presence rather than using a hosting company. That way you have complete control over your server. The RPi takes so little power and has no moving parts that letting it sit and run is not the same as turning your old clunker PC into a Linux box for the same purposes. I loaded up WordPress on top of the LAMP stack and was pleased with the ability to easily set up a blog. It’ll likely never see the light of day, but I could, if I wanted, port the contents of this blog back to the RPi pretty easily and open up the webserver/blog to the world. It’s mostly a MySQL database restore…

Fun stuff! I’m looking forward to brushing up on my tech skills soon when I have a bit more time to play with this stuff…

The era of the consumer touch-screen Chromebook is upon us

In December (which is very soon!), per Engadget, you’ll be able to get a touchscreen Chromebook for $299! I’m disappointed that it doesn’t have 4GB of RAM, but that’s a concession, I’m sure, to keep the price under $300. I’ve not seen much definitive telemetry yet on memory upgrades on the C720 series Chromebooks (I added 4GB to my C710-2833 earlier in the fall). Traffic on the Chromebook Central site implies that the memory is not upgradeable on the C720’s but the Acer website for the C720’s says that there are 2GB and 4GB models, and that the 2GB models have a max of 4GB. Check back on Chromebook Central to see what the hive mind says about upgrading memory on the C720’s. I assume if you can upgrade a C720, that a C720P can be, but that may not hold true.

The bottom line though, is that it’s exciting to see touch coming to such an inexpensive laptop!